” DHCP SERVER “

Pertama kali yang harus kita lakukan adalah menginstall dhcp3-server dulu dengan cara : Ketik apt-get install dhcp3-server

Setelah instalasi kita masuk pada dir etc dan edit file dhcpd.conf, seperti dibawah ini :
• Ketik kan cd /etc/dhcp-3 [enter] ;
• Lalu masuk pada configurasi yaitu pico dhcpd.conf [enter] ;
• Setelah itu mulai lah edit configurasi yg seperti dibawah ini :

#
# Sample configuration file for ISC dhcpd for Debian
#
# $Id: dhcpd.conf,v 1.1.1 2002/05/21 00:07:44 peloy Exp $
#

# The ddns-update-style parameter controls whether or not the server
will
# attempt to do a DNS update when a lease is confirmed. We default to
the
# behavior of the version 2 packages ‘none’, since DHCP v2 didn’t
# have support for DDNS.)
ddns-updated-style none;

# option definitions common to all supported network . . .
#option domain-name “example.org”;
#option domain-name-servers nsl.example.org, ns2.example.org;

#default-lease-time 600;
#max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;

# Use this to send dhcp log message to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;

# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}
# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.254 {
# range 10.254.239.10 10.254.239.20;
# option routers rtr-239-0-1. example.org, rtr-239-0-2. example.org;
#}.

# This declaration allows BOOTP client to get dynamic addresses,
# which we don’t really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
# range dynamic-bootp 10.254.139.40 10.254.239.60;
# option broadcast-address 10.254.239.31;
# option routers rtr-239-32-1. example.org;
#}

# A slightly different configuration for an internal subnet.
Subnet 192.168.25.0 netmask 255.255.255.0 {
range 192.168.25.2 192.169.25.10;
option domain-name-servers http://www.debian.com;
# option domain-name “internal.example.org”;
option routers 192.168.25.1;
option broadcast-address 192.168.25.255;
default-lease-time 600;
max-lease-time 7200;
}

# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
# hardware Ethernet 0:0:c0:5d:bd:95;
# filename “vmunix.passacaglia”;
# server-name “toccata.fufue.com”;
#}

# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOT or DHCP. Host for which no fixed address is specified can
only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware Ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.ufue.com;
#}

# You can ceclare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.244/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class “foo” {
# match if substring (option vendor-class-identifier, 0, 4) = “SUNW“;
#}

#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of “foo”;
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of “foo”;
# range 10.0.29.10 10.0.29.230;
# }
• Perlu anda perhatikan yang di edit adalah perintah yang bergaris bawah saja ;
• Kemudian save file yang sudah kita edit.

• Terus kita restart dengan cara mengetikkan : /etc/initd/dhcp3-server restart;

Untuk pengecekan, pada client windows pertama kita harus mengubah pengelamatan IP secara Automatically. Setelah itu kita ping pada alamat server kita yaitu 192.168.1.1. Jika ada jawaban dan tidak muncul failed maka dhcp server berhasil.

sELaMaT mEncObA ……..

About muzayyanah

apa adanya " be your self "
This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s